升降舞台电控箱接线应该注意什么？

1、升降舞台http://www.sdsjpt.net/盘外的配线应采用切当的方式进行关怀，好比软管，钢管等，并且布线应走机床不易损伤的中央。
Wiring landing stage outside the disk should be cut when caring way, like a hose, pipe, etc. and central machine wiring should go easy injury.

2、升降舞台盘外机床之间的连线或电源线等必须放入桥架中，桥架用底座进行撑持，盘外配管应做到归正抗衡。
Landing stage plate connection between the external machine or power lines must be placed in the bridge, the bridge carried by the base support, disk outer pipe should be done anyway to compete.

3、升降舞台http://www.sdsjpt.net/包装机等加热设施的连接，布线不克不及设在凑近加热部份之处。接线在带有端子台的联接箱内发展，加热器连线使用玻璃、陶管电线，不克不及运用可燃性电线，盘外所有的电线邻接都要在连贯箱内进行，线的两端不克不及有找寻。
Connection landing stage packaging machines and other heating facilities, wiring can not be located in the part of the Department leaned heating. In connection with the wiring inside the terminal block development, heater wire glass,

earthenware wire, can not use flammable wires, all the wires adjacent to the outer disc to be in the box were consistent, both ends of the line is not have sought grams less.

4、升降舞台中继合端子台的同一端子顶多连贯两根电线，感触器布线如在易被撞部位发展时，应运用软管作爱惜，软管应尽量套在感触器根部。
Landing stage relay terminal block together coherent same terminal at most two wires, wire feeler as easy to hit the site at the time of development, should be used as a spare hose, the hose should be set in the feeler roots.