交流电和直流电两用型升降舞台操作方式解析

升降舞台操作方式为电动式，上升时按“上升”按钮，下降时按“下降”按钮，平台台面上和平台控制箱上均有操作按钮，操作时至少2人操作，1人地面，1人平台台面上。充电完成：关闭“外接电源开关”并拔下外接电源插头，使用行走功能。
Lifting stage operation for electric type, press "up" button to rise, according to the "down" button down, have the operation button platform table and platform control box, the operation of at least 2 operation, 1 floor, 1 people on the platform surface. Charging complete: close the external power switch and pull off the external power plug, the use of walking function.

使用外接电源时：先关闭平台控制箱内部的“24V电源开关”，再打开控制箱内部的“220V电源开关”，然后插上外接电源插头，方可正常使用。
The use of an external power supply: first off the platform control box inside the "24V power switch, then open the control box" internal "220V power switch", and then plug the external power plug, can be normal use.

使用升降舞台时：先关闭控制箱内的“220V电源开关”，拔下外接电源插头，再打开控制箱内的“24V电源开关”方可正常使用，再打开平台外侧的“电瓶电源开关”方可使用行走功能，利用倒顺开关控制行走、后退，握住牵引杆转向把手，缓慢拧动油门线，使升降台实现前走或后退，转弯等功能。
The use of lifting stage: the first close the control box "220V power switch", unplug the external power plug, then open the control box of the "24V power switch" can be normal use, then open the platform outside of the "battery power switch" can be used for walking function, the use of reverse switch control, walking back, hold traction rod steering handle, slow twist throttle line, make the lifting platform to achieve ahead or back, turning function.

使用升降舞台时，当设备出现升降缓慢或点击明显无力时，需及时给电瓶充电。充电时先把24V电源开关关闭，然后打开220V电源开关，把外置插头插入220V电源中，即实现充电，注意：充电时严禁升降台操作作业!电瓶充电时间严禁超过8小时。
Using the lifting stage, when the equipment lifting slowly or click on the obvious weakness, the need for timely to charge the battery. When charging the first 24V power switch off, then open the 220V power switch, plug the plug into the 220V power supply, namely realizing charging, note: lifting platform operation is prohibited when charging the battery charging time is strictly prohibited! More than 8 hours.

使用前请先空车试机、运行正常方可上人使用!操作员需经过培训考核后方可从事平台操作!平台未撑支腿严禁使用!斜坡严禁使用!